CAM EZ-551CHN 99-06

Beskrivning av CAM EZ-551CHN 99-06

551 Easy Start Camshaft Kit

Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

Optimized for 88"/96"/103" to 106" Touring bike with slip-on mufflers and 9.0:1 to 9.0:9 compression with stock starter

Bolt-in for stock or mildly modified Touring models

Greatly improves low-end and midrange torque

Strongest from idle to 4000 rpm

Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions

Made in the USA

Not recommended for compression ratios of 10.0:1 or greater.

Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Not for models with OEM compression releases.

Can be used with stock pushrods, lifters, and springs (unless noted).

Type	Chain
Brand	S&S CYCLE
Grind	551 Series
Model	Easy Start
Units	Kit
Features	Includes Installation Kit
Application	Exhaust| Intake
Intake lift	0,550"
Intake open	17°
Exhaust lift	0,550"
Exhaust open	41°
Intake close	19°
Product name	Camchest Kit
Exhaust close	17°
Intake duration	215°
Exhaust duration	237°
Intake lift at tdc	0,178"
Vendor part number	106-5293
Exhaust lift at tdc	0,170"
Intake lobe centerline	91°
Exhaust lobe centerline	102°