585G CAM KIT W/4 GEARS

Beskrivning av 585G CAM KIT W/4 GEARS

585G Gear Drive Camshaft Kit

Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1

Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible

Increases valve timing accuracy by eliminating chain lash and loosely fit stock chain drive

Material must be removed from inner surface of the stock gear cover to install

3500-6000 rpm for 88" to 103" engines and 2500-5500 rpm for larger engines

A hydraulic press and other professional level tool are required for installation

S&S recommends that adjustable pushrod/cover get be used

Cam bearings and gaskets must be replaced when installing new cams

Kit includes camshafts, inner gears, outer gears, inner bearings, outer bearings, gasket and instructions

Installer must check coil bind, valve to valve clearance and valve to piston clearance.

Due to the inherent characteristics of gear drives, more valve train noise may occur.

Made in the USA

'99-'04 models require high-lift springs and adjustable pushrods.

Type	Gear
Brand	S&S CYCLE
Grind	585 Series
Units	Kit
Application	Exhaust| Intake
Intake lift	0,585"
Intake open	20°
Exhaust lift	0,585"
Exhaust open	60°
Intake close	45°
Product name	Camshaft Kit
Exhaust close	20°
Intake duration	245°
Exhaust duration	260°
Intake lift at tdc	0,186"
Vendor part number	33-5179
Exhaust lift at tdc	0,179"
Intake lobe centerline	102,5°
Exhaust lobe centerline	110°