CHARGER USB-C 3.3A SAE

Beskrivning av CHARGER USB-C 3.3A SAE

Battery to USB-C Charger

Delivers fast and safe USB-C charging for your portable devices

Cable can be routed to mount wherever a USB-C charging port is needed

Charge connector (input): O-31 battery lead with M6 (1/4”) rings/eyelets (included) or 2-pin SAE (if disconnected from O-31); fits most powersport battery terminals

Rubber seals and caps at connection points to help protect from the elements

Charges one USB device with up to 3300 mA current available – Charge current adapts to connected device for safe recharging

Ideal for 12 V AGM & 12.8 V LiFeP04 / LFP lithium batteries in your motorcycle

Low input (<12.4 V) auto-off protects vehicle battery from total discharge

Short circuit, overheat, over-voltage protection; battery lead includes in-line fuse

Features AGM/LFP monitor – LED will blink every 5 seconds if battery charge = 50%, sufficient to start vehicle engine

Rated for normal T° and outdoor use

Built in protection turns off USB charging after 1 hour to prevent your parked vehicle’s battery from draining

Charge your phone, GPS, camera & tablet with your weatherproof charger, on your motorcycle or up to 80" away from 12 V supply

Power (Output): 3300 mA @ 5 V

Fully automatic

Supply range: 12.4 to 16 V dc

Standby mode – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3 V

2 LED battery monitor

LED LFP: 13.1 V to 13.3 V

LED AGM: 12.4 V to 13.1 V

No LED < 12.4 V

OFF = 9 V

Cable rating: SPT-1

Use: -20°C/-4°F very low temperature, remains flexible at ‘below freezing’ temperatures

Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket; use any USB cable, seals when inserted

Amps	3300 mA
Type	USB-C
Brand	TECMATE
Units	Each
Volts	12 V| 5 V
Features	Rubber Cap
For make	Universal
Product name	Charging Cable
Vendor part number	O118
Power connection type	Battery Lead| SAE Plug| USB-C